BS EN 10248-1 1996
|
ID： |
DF837B28751747DA9E0F00EA62553BD7 |
|
文件大小(MB)： |
0.19 |
|
页数： |
18 |
|
文件格式： |
|
|
日期： |
2013-6-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10248-1:1996,Hot rolled sheet piling,of non alloy steels —,Part 1: Technical delivery conditions,The European Standard EN 10248-1:1995 has the status of a,British Standard,ICS 77.140.70,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Mon Dec 25 23:15:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 10248-1:1996,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and,comes into effect on,15 March 1996,. BSI 12-1999,The following BSI references,relate to the work on this,standard:,Committee reference ISE/12,Draft for comment 93/309092 DC,ISBN 0 580 24921 2,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted to Technical,Committee ISE/12, Structural steels, upon which the following bodies were,represented:,BEAMA Ltd.,British Constructional Steelwork Association Ltd.,British Iron and Steel Producers’ Association,British Railways Board,Department of Transport,Institution of Structural Engineers,Lloyds Register of Shipping,National Association of Steel Stockholders,Railway Industry Association,Society of Motor Manufacturers and Traders Limited,Steel Construction Institute,Welding Institute,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Mon Dec 25 23:15:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 10248-1:1996,. BSI 12-1999 i,Contents,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,Text of EN 10248-1 3,List of references Inside back cover,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Mon Dec 25 23:15:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 10248-1:1996,ii . BSI 12-1999,National foreword,This British Standard has been prepared by Technical Committee ISE/12 and is,the English language version of EN 10248-1:1995 Hot rolled sheet piling of non,alloy steels — Part 1: Technical delivery conditions published by the European,Committee for Standardization (CEN).,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Cross-references,Publication referred to Corresponding British Standard,EN 10002-1 BS EN 10002 Tensile testing of metallic materials,Part 1:1990 Method of test at ambient temperature,EN 10020 BS EN 10020:1991 Definition and classification of,grades of steel,EN 10021 BS EN 10021:1993 General technical delivery,requirements for steel and iron products,BS EN 10027 Designation systems for steel,EN 10027-1 Part 1:1992 Steel names, principal symbols,EN 10027-2 Part 2:1992 Steel numbers,EN 10079 BS EN 10079:1993 Definition of steel products,EN 10204 BS EN 10204:1991 Metallic products. Types of inspection,documents,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 12, an inside back cover and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on the,inside front cover.,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Mon Dec 25 23:15:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10248-1,June 1995,ICS 77.140.70,Descriptors: Iron and steel products, hot rolled products, sheet pilings, steels, unalloyed steels, chemical composition, grades: quality,classifications, designation, mechanical properties, weldability, surface condition, tests, inspection, marking,English version,Hot rolled sheet piling of non alloy steels —,Part 1: Technical delivery conditions,Palplanches laminées à chaud en aciers non,alliés — Partie 1: Conditions techniques de,livraison,Warmgewalzte Spundbohlen aus unlegierten,St鋒len — Teil 1: Technische,Lieferbedingungen,This European Standard was approved by CEN on 1995-05-19. CEN members,are bound to comply with the CEN/CENELEC Internal Regulations which,stipulate the conditions for giving this European Standard the status of a,national standard without any alteration.,Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any,CEN member.,This European Standard exists in three official versions (English, French,German). A version in any other language made by transla……
……